Component cabinets from Priess A/S are primarily used used for electrical switchboards coils, controls frequency converters, and more.
Constructed on a frame of square tubes, which subsequently are clad with profiled aluzinc sheets.
The foundation is produced of 3 mm plates, which are welded together and subsequently hot-dip galvanized.
Component cabinets from Priess A/S are manufactured in four standard sizes: Type 800, type 1200, type 1600 and type 2000.
All standard component cabinets are painted in URKI-TEXT textured paint based on a color of the RAL color chart.
Component cabinets from Priess A/S are used for controls, electrical switchboards, coils, frequency converters, and more. They are manufactured in three standard sizes: Type 800, Type 1200 and Type 1600. The component cabinets are painted in URKI-TEXT textured paint in a color of your choice based on the RAL chart. The combination of welded frames covered with aluzinc sheets and a foundation made of welded steel angle gives the cabinet a great strength.
Apart from our standard component cabinets Priess A/S also offers customized solutions to meet individual requirements.
The construction of a customized solution is the same as for our standard cabinets, however you can get the cabinet in accordance with your needs.
Component cabinets can be manufactured according to customer specifications in modular increments of 200 mm in both width and depth. Regarding the height the following is possible: 1250mm, 1500mm, 1750mm, 2000mm, 2200mm and 2400 mm.
The cabinets can be supplied insulated with both 50mm and 100mm insulation.
For special environments, such as waterfront areas with lots of saltwater spray, the cabinets are available with seawater-resistant aluminum.
A double component cabinet from Priess A/S is both an economical and aesthetic solution.
This solutions has doors on both sides and a dividing wall separating the two compartments in the cabinet.